Worktop-Oil, 20ml

2,95€
(147,50€ / l)
incl. VAT plus shipping
Contents: 20 ml

Worktop-Oil, 20ml

Convenient sample size for testing
  • Practical sample size - for testing or small projects
  • Enables assessment of the colour and surface effect before application
  • Suitable for small test areas and sample pieces
  • LFGB-tested (approved for food contact), water-repellent
More about this product
Worktop-Oil Worktop-Oil
2,95€
(147,50€ / l)
incl. VAT plus shipping
  • American Express
  • Apple Pay
  • Bancontact
  • EPS
  • Google Pay
  • iDEAL Wero
  • Klarna
  • Maestro
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

Product description

Testing & Certifications

Application

Care & Cleaning

Safety instructions

FAQ & Tips

Downloads

Small size. Big impact.

OLI NATURA® Worktop-Oil in a convenient sample size for trying and getting to know the product.

🔗 You can find all information on processing, application, and safety on the product page for the original product.

  • GISCODE Ö10+
  • LFGB-tested (food-safe)
  • DIN 71-3 (Safety of children's toys)
  • DIN 53160 (resistant to saliva and perspiration)
  • Cobalt-free & oxime-free, FREE from formaldehyde, aromatic compounds, biocides, preservatives

PREPARATION: 

Sand the wood surface professionally: Final sanding for furniture with a maximum grit of 180.
✔ Wood moisture: 8–12 %.
✔ Substrate: Firm, dry, clean, textured, sound and free from release agents.
✔ Application conditions: Apply at room temperature.

OPTIONAL STEPS

Higher wear or faster curing: OLI-NATURA Hardener Add in a ratio of 5:1 The mixture remains workable for 3 hours.

Tannin-rich woods (e.g. oak): Before oiling treat with PreOilCleaner .

GOOD TO KNOW:

  • When using OLI-NATURA Antique Reactive Stain the surface must previously neither be wetted nor cleaned with PreOilCleaner.
  • 2K application: Mix with OLI-NATURA Hardener (5:1) . Pot life: approx. 2–3 hrs.. Curing time is reduced by 2–3 days.
  • Coverage: Depending on wood species, sanding and absorbency. Excess oil as well as low temperatures and high humidity delay drying.

APPLICATION:

  1. Shake/stir the container thoroughly.
  2. (Optional) 2K application: Mix 5 parts oil with 1 part hardener thoroughly.
  3. Apply a small amount of oil thinly with a rubber squeegee or spatula. Then carefully work it in by hand or with an orbital sander using a beige pad. Alternatively, the oil can be applied and worked in directly with the beige pad. Apply more oil to dry areas. 
  4. Allow the oil to penetrate for 15–30 minutes.
  5. Polish the excess oil by hand or with an orbital sander using a white polishing pad until the surface is saturated and no longer appears wet. If there is too much oil on the surface, remove the excess with a cloth before polishing. The surface must not feel sticky.
  6. If necessary, polish again the next day with a white polishing pad and 5–10 ml/m² of oil. 
  7. Coverage:

1 coat, depending on the absorbency of the substrate, 20-40 g/m² per coat (25-50 m²/l) Drying: 

Depending on humidity/temperature - dust-dry in 1.5-2 hrs., fully cured in 5-7 days; the 2K variant reduces this by 2-3 days. During this time, treat gently, protect from water and do not clean with a damp cloth. Storage:

Unopened in the original container, shelf life approx. 36 months. Clean work tools:

OLI-NATURA brush cleaner or oil thinner. 

Safety information: Oil-soaked cloths and rags can
spontaneously ignite due to heat buildup . After use, thereforestore airtight in a metal container or submerge in water luftdicht in einem Metallbehälter aufbewahren oder in Wasser tauchen

Low maintenance - a major advantage

A common misconception: Oiled surfaces are considered high-maintenance. In fact, they are particularly easy to maintain - simply re-oiling them refreshes their appearance time and again, and scratches can be repaired selectively.

Freshly oiled wood is sensitive to water during the first few days. Contact with liquids should be avoided until it has fully cured, and spilled water should be wiped up immediately.

Here are some care tips:

Routine cleaning

  • Dust regularly with a soft cotton cloth.
  • Remove light dirt with a slightly damp cloth.
  • Clean stubborn dirt with OLI-NATURA wood soap – do not use all-purpose cleaners, as they dry out the wood.

Protection from moisture & heat

  • Do not leave standing liquid on the surface.
  • Wipe up spilled drinks immediately.
  • Place hot pots only on trivets.

Refreshing & care

  • Re-oil as needed - when the wood appears less water-repellent or looks dry.
  • To refresh the protective layer, use OLI-NATURA wood care oil, OLI-NATURA Refresher, or care with itself Apply a thin layer with a cotton cloth and rub in evenly.

Easy repairs

  • Fine scratches can be removed by lightly sanding and re-oiling.
  • Smooth damaged areas locally with sandpaper and treat them with the original oil.
  • Color differences even out over time.

With minimal effort, oiled wood stays beautiful and durable for a long time.

The product is not subject to labeling requirements and, in accordance with Regulation (EC) No. 1272/2008, is not classified as hazardous. Not classified as dangerous goods; no GHS pictograms or signal words are required.

Oil-soaked cloths/pads can spontaneously ignite due to heat buildup! Therefore, clean them immediately after use or store them under water. P102 Keep out of reach of children. 

Does Worktop-Oil change the color of the wood?

Yes, although the oil is not pigmented , it enhances the natural color of the wood and emphasizes the grain. This effect is referred to in technical jargon as the permanent wet effect or color enhancement .

Is the oil suitable for wood with epoxy resin inlays?

Yes, thanks to its high transparency, it is ideal for combinations of wood and epoxy resin. However, for this application, we recommend using the OLI-NATURA Hardener (hardener), so that the oil bonds better with the wood and adheres reliably to the epoxy resin.

Can I treat wooden sinks and washbasins with Worktop-Oil?

Yes, for this application, we recommend using it with OLI-NATURA Hardener (hardener)to increase the cross-linking density, water resistance, and cream resistance. In addition, the surface should be wetted with PreOilCleaner before oiling to optimize absorption and protective performance.

Can I apply Worktop-Oil with a brush?

No, brush or roller application is not recommended because the oil is highly viscous and is quickly applied too thickly . Applying it with a spatulais more efficient for achieving a thin, even coat. The oil is then massaged in with a pad and, after a short reaction time, polished.

Fast delivery

Receive your package within a few days

Quality redefined

Directly from our workshop

Regular promotions

Exclusive offers just for you!

Personal support

Real people, real solutions