Pretreatment

PreOilCleaner thoroughly cleans and ensures optimal preparation of untreated or freshly sanded wooden surfaces such as furniture, stairs, parquet and paneling. It increases the wood’s absorbency and minimizes tannin reactions in tannin-rich woods such as oak. Suitable for all types of wood, it is diluted with water and applied before oiling. Mix the product with warm water and apply evenly in a slightly damp layer using a wrung-out cotton cloth or sponge. For floors, a slightly damp mop is recommended. Allow the wooden surface to dry thoroughly. After complete drying, carry out intermediate sanding if necessary, remove dust, and then treat with an OLI-NATURA oil of your choice. This product is NOT suitable for regular, daily cleaning. When using the OLI-NATURA Antique reactive stain, the surface should NOT be treated with PreOilCleaner beforehand.

Reactive pre-stain for oak woodVOC-free water-based reactive stain for tannin-rich woods such as oak. The pretreatment reacts with natural tannins and creates authentic fuming and graying effects - more eco-friendly and significantly easier to process than traditional ammonia fuming.Depending on the selected shade - Lye-Washed, Fumed, or Black Fumed - different aging effects are created, ranging from light fumed tones to deep black effects. The shades can be mixed with one another.In combination with OLI-NATURA oils, particularly deep and vibrant surface appearances are achieved.Suitable for both artisanal and industrial application (rolling, brushing, spraying, roller-coater). Subsequent treatment with oil or wax is required.Pre-wetting (water popping) should be avoided, as this affects the reaction in the wood.

This gentle yet powerful cleaning concentrate is ideal for all outdoor wood surfaces - from garden furniture to decking, whether made of untreated or oiled wood.It reliably removes green deposits, dirt and light signs of weathering, prevents them from quickly re-forming and optimally prepares the wood for subsequent oil treatment. Our 1-litre concentrate is highly economical and is mixed with water in a ratio of 1:3 or 1:4 - but can also be applied undiluted if required. Sustainably packaged: The bottle body is made of 100% recycled plastic (rPET) and is fully recyclable. The childproof push-and-turn cap ensures safe use.

FOR REGULAR CLEANING OF OILED WOODEN SURFACES Footprints, food stains, adhering dirt - oiled wood has to withstand quite a lot in everyday use. Usually, a dry cloth or clear water is sufficient. Where dirt can no longer be removed this way, OLI NATURA® wood soap comes into play. It cleans and cares for the surface in a single step, removes everyday dirt and also has a replenishing effect. This preserves the natural character of the wood - it can be used undiluted or diluted in a variety of ways. Which wooden surfaces is OLI NATURA® wood soap suitable for? For oiled, waxed, soaped or lye-treated wood indoors - from parquet and floorboards to stairs, furniture and other wooden surfaces that can be wiped with a damp cloth. Suitable for private and commercial use. When does wood need more than OLI NATURA® wood soap? Wood soap handles regular cleaning and maintenance care. For heavy, old, ingrained or deep-seated dirt, basic or intensive cleaning is the better choice - especially before re-oiling. If the surface appears dry, dull or visibly worn, maintenance oil for oiled wood is recommended. Does OLI NATURA® wood soap change the appearance of the wood? Wood soap cleans without leaching the surface or leaving a grey haze. This leaves the wood looking clean, fresh and naturally cared for after cleaning. How easy is OLI NATURA® wood soap to use? For regular cleaning, add 5–10 ml of wood soap per litre of lukewarm water and wipe with a damp cloth - using a cloth or white pad on small areas, and a floor wiper or flat mop on floors. For more stubborn dirt, apply undiluted to the affected area. The pH-neutral formula is gentle on skin and wood. What else makes OLI NATURA® wood soap special? The concentrated formula is highly economical, solvent-free and pleasantly fresh-scented. The bottle is made of 100% recycled plastic and is fully recyclable. A push-and-turn closure ensures child-safe handling.

These water-based wood stains in six colors are ready to use and can optionally be mixed together to create a wide range of shades. They are perfect for adding color to raw or stripped softwood and hardwood surfaces, ideal for a broad range of interior wood projects - from children's furniture and toys to stairs, doors, and paneling. Thanks to its clear staining effect, our wood stain highlights the natural beauty of the wood without concealing its texture. Application is simple: After wetting the wood and intermediate sanding, apply the stain with a brush or sponge, remove excess material, and allow it to dry. The treated surface can then be oiled, waxed, or lacquered as desired to achieve the desired finish. To prevent possible bleeding when overcoating with water-based lacquers, we recommend optionally mixing the stain with OLI-AQUA Hardener 13.2 in a ratio of 10:1. The easy application of our wood stain enables both professionals and DIY enthusiasts to achieve excellent results.