Care & Cleaning

FOR REGULAR CLEANING OF OILED WOODEN SURFACES Footprints, food stains, adhering dirt - oiled wood has to withstand quite a lot in everyday use. Usually, a dry cloth or clear water is sufficient. Where dirt can no longer be removed this way, OLI NATURA® wood soap comes into play. It cleans and cares for the surface in a single step, removes everyday dirt and also has a replenishing effect. This preserves the natural character of the wood - it can be used undiluted or diluted in a variety of ways. Which wooden surfaces is OLI NATURA® wood soap suitable for? For oiled, waxed, soaped or lye-treated wood indoors - from parquet and floorboards to stairs, furniture and other wooden surfaces that can be wiped with a damp cloth. Suitable for private and commercial use. When does wood need more than OLI NATURA® wood soap? Wood soap handles regular cleaning and maintenance care. For heavy, old, ingrained or deep-seated dirt, basic or intensive cleaning is the better choice - especially before re-oiling. If the surface appears dry, dull or visibly worn, maintenance oil for oiled wood is recommended. Does OLI NATURA® wood soap change the appearance of the wood? Wood soap cleans without leaching the surface or leaving a grey haze. This leaves the wood looking clean, fresh and naturally cared for after cleaning. How easy is OLI NATURA® wood soap to use? For regular cleaning, add 5–10 ml of wood soap per litre of lukewarm water and wipe with a damp cloth - using a cloth or white pad on small areas, and a floor wiper or flat mop on floors. For more stubborn dirt, apply undiluted to the affected area. The pH-neutral formula is gentle on skin and wood. What else makes OLI NATURA® wood soap special? The concentrated formula is highly economical, solvent-free and pleasantly fresh-scented. The bottle is made of 100% recycled plastic and is fully recyclable. A push-and-turn closure ensures child-safe handling.

REFRESH OILED WOOD WITHOUT CHANGING ITS COLOR TONE. Oiled wood needs care. However, especially on light-colored surfaces, a classic maintenance oil can deepen the wood tone again - and that is not always desirable. OLI NATURA® Refresher takes a different approach: The colorless, VOC-free hydro maintenance oil cares for and regenerates oxidatively oiled wood surfaces without significantly changing their existing color character. Ideal for light, white-oiled, and colored-oiled surfaces. Apply thinly. Spread evenly. Allow to dry. For initial care and regular refreshing - simple, fast, and visually neutral. When and why is OLI NATURA® Refresher the right choice? For oiled wood that should look cared for again. OLI NATURA® Refresher is suitable for the initial care and regular refreshing of oxidatively oiled parquet and plank floors, stairs, and indoor furniture - for both private and commercial use. Especially when the surface looks dry or dull but the existing color tone should be preserved. The care product has a mild odor, is uncomplicated to use, and dries quickly. Would you like to emphasize the color depth and enhancement of the wood grain more strongly again? Then choose OLI NATURA® wood maintenance oil. For surfaces treated with hardwax oil, OLI NATURA® wood maintenance wax is the suitable care product. How does OLI NATURA® Refresher change the appearance of the wood? The Refresher is pigment-free, colorless, and formulated to be visually neutral. It cares for the surface without adding additional pigments or unnecessarily deepening the existing color tone. This makes it suitable for everything from raw wood look and white oil to colored-oiled surfaces. How easy is OLI NATURA® Refresher to apply? Clean. Apply. Spread evenly. Allow to dry. Small areas can be cared for with a cloth or white pad. On larger areas, the Refresher can be applied with a sprayer and spread with a flat mop or floor wiper. It is used neat and undiluted. What else distinguishes OLI NATURA® Refresher? Especially practical: Cloths and pads soaked with Refresher do not tend to self-ignite. It is also VOC-free, has a mild odor, and is baubook-declared - making it interesting for ecologically oriented construction and renovation projects as well.

Wellness for wood: This naturally curing maintenance oil for oiled wood surfaces has many beneficial properties: It refreshes the “faded” color of the wood, gives the surface new depth and radiance, absorbs very quickly, and replenishes the pores with fresh oil. This renews the protective effect and, consequently, the resistance of the surface. It is particularly recommended for initial care and refreshing parquet and plank floors, stairs, and indoor wooden furniture treated with oxidatively drying impregnating oils. The natural oil-based maintenance oil is not pigmented. Nevertheless, it enhances the wood’s grain and color. Thanks to its low viscosity, it is easy to apply: For small pieces of furniture, simply apply a little maintenance oil to a lint-free cotton cloth or polishing pad and wipe it over the surface to be treated. To refresh wooden stairs, apply the maintenance oil sparingly with a polishing pad, spread it evenly, and polish it with a cotton or oil-absorbing cloth. For caring for parquet and plank floors, the maintenance oil can also be applied evenly in a thin layer using a sprayer and, after a short exposure time, polished by hand or with a single-disc machine using a polishing pad. The wood care product contains only ingredients necessary for its purpose. Its main component is refined linseed oil, supplemented with medical-grade isoparaffin for optimal self-penetration. WHEN TO CARE FOR THE WOOD? The intervals at which the wood surface needs to be refreshed depend on the level of wear. Good indications that the surface needs care are when its water resistance decreases, the depth of color fades, and/or the surface feels dry and dull. The surface should then be re-oiled. The maintenance oil is also available in the Care Set No. 1.  To test the effect of the oil, we offer a practical  sample size.

Wellness for wood: This naturally hardening maintenance wax combines oil and wax in one product. It is especially recommended for initial treatment and refreshing parquet and plank floors, stairs, and indoor wooden furniture treated with our oxidatively drying hardwax oils. The oil replenishes the wood’s pores with fresh oil, while the wax creates a fine surface film. This renews the protective effect and therefore also the resistance. The maintenance wax is not pigmented. Nevertheless, it subtly enhances the depth of color again. Thanks to its low viscosity, it is easy to apply: For small pieces of furniture, simply apply a little maintenance product to a lint-free cotton cloth or polishing pad and wipe it over the surface to be treated. To refresh wooden stairs, apply the maintenance wax sparingly with a polishing pad, spread it, and polish it with a cotton or oil-absorbing cloth. To maintain parquet and plank floors, the maintenance wax can also be applied evenly in a thin layer using a sprayer and, after a short application time, polished by hand or with a single-disc machine using a polishing pad. The wood maintenance product contains only the ingredients necessary for its purpose. In this maintenance wax, refined linseed oil and carnauba wax form the base. The medical-grade isoparaffin ensures good self-penetration, which is why it is so easy to apply. When should you maintain the surface? The intervals at which the wood surface needs to be refreshed depend on the level of use. Good indications that the surface needs maintenance are when water resistance and/or color depth decreases and/or the surface feels dry and dull. The surface should then be recoated with oil. The maintenance oil is also available in the Maintenance Set No. 2.To test the effect of the oil, we offer you a practical sample size.

Well cared for simply lasts longer. And because that is the case, we offer the utensils needed to clean and care for naturally oiled wooden furniture in the practical Care Set No. 1. The Care Set No. 1 includes: 250 ml OLI-NATURA wood soap 250 ml OLI-NATURA wood care oil 1 care flyer with step-by-step instructions and tips 1 polishing pad 1 oil-absorbing cloth 1 pair of disposable gloves (PLA biodegradable) With the concentrated »OLI-NATURA wood soap«, dirt can be gently removed without damaging the wood. You can achieve intensive color revitalization and deep care for the wood with the »OLI-NATURA wood care oil«. The special POLISHING PAD is used to massage in the care oil, while the OIL-ABSORBING CLOTH is used to remove excess oil and for final polishing. The DISPOSABLE GLOVES keep your hands clean. We have also included detailed instructions with plenty of tips.  People who are conscious of conserving resources will be pleased to know that the care oil should always be applied sparingly. This means that the 250 ml container can be used to care for and preserve a large number of beautiful naturally oiled pieces of furniture.  Application: For refreshing naturally oiled wooden surfaces. If in doubt, test on a concealed area first. To test the effect of the wood care oil, we offer a practical sample size.   Important: Cloths/pads soaked in oil can spontaneously ignite due to heat buildup. Therefore, clean them immediately after use or store them under water.

Well cared for, it simply lasts longer. And because that is the case, we offer the utensils needed for cleaning and caring for oiled/waxed wooden furniture in the practical Care Set No. 2. The Care Set No. 2 contains: 250 ml OLI-NATURA wood soap 250 ml OLI-NATURA wood care wax 1 care flyer with step-by-step instructions and tips 1 polishing pad 1 oil-absorbing cloth 1 pair of disposable gloves (PLA - biodegradable) With the concentrated »OLI-NATURA wood soap«, dirt can be gently removed without damaging the wood. For intensive colour refreshment and deep care of the wood, use the »OLI-NATURA wood care wax«. The special POLISHING PAD is used to work the care wax into the surface, while the OIL-ABSORBING CLOTH is used to remove excess oil and for final polishing. The DISPOSABLE GLOVES keep your hands clean. We have also included detailed instructions with many useful tips.  People who are conscious of conserving resources will be pleased to know that the care wax should always be applied sparingly. This means the 250 ml tin can be used to care for and preserve a great many beautiful naturally oiled pieces of furniture.  Application: For refreshing oiled and hardwax oil-treated wooden surfaces. If in doubt, test on a concealed area first. To test the effect of the wood care wax, we offer a practical sample size.   Important: Cloths/pads soaked with oil can spontaneously ignite due to heat build-up. Therefore, clean them immediately after use or store them under water.

CLEAN OILED WOOD. CARE FOR IT. MAINTAIN THE LOOK. Oiled wood surfaces stay beautiful for longer when cleaning and care are coordinated. The OLI NATURA® Care Set No. 3 contains everything you need to clean and refresh Scandic-Oil oiled, white-oiled, and naturally oiled wood surfaces. The wood soap cleans gently. The refresher cares for the surface and refreshes its appearance without altering the color. The pad and oil-absorbing cloth make application easier. One set. Two care steps. Everything included. When and for what is OLI NATURA® Care Set No. 3 the right choice? For oiled furniture and other wood surfaces that should look clean and well cared for again. The set is particularly suitable for Scandic-Oil oiled, white-oiled, and naturally oiled surfaces whose existing color character should be preserved. The wood soap removes dirt before care. The refresher then regenerates the oiled surface without unnecessarily deepening the color. What is included in the OLI NATURA® Care Set No. 3? 250 ml OLI NATURA® wood soap 250 ml OLI NATURA® Refresher 1 white polishing pad 1 oil-absorbing cloth 1 care flyer with step-by-step instructions and tips How does the care system work? Clean. Refresh. Done. First, clean the surface with OLI NATURA® wood soap. Then apply and work in OLI NATURA® Refresher with the white pad. The oil-absorbing cloth is used to remove excess product and for final care. What makes Care Set No. 3 particularly practical? All the required products and tools are already coordinated and compiled in one set. This makes the care set suitable both for regular maintenance care and for refreshing visibly dry or dull oiled surfaces. The included refresher is VOC-free, low-odor, and formulated to be visually neutral. Cloths and pads soaked with Refresher also do not tend to self-ignite.

SMOOTH. OIL. PRESERVE FOR LONGER. Everything cutting board enthusiasts need for natural wood care: The OLI NATURA® Care Set No. 4 combines high-quality boiled linseed oil with practical accessories for smoothing, oiling and refreshing.  The sanding sponge smooths rough areas and minor signs of use. The boiled linseed oil penetrates deep into the wood, refreshes the colour and grain, and protects the surface from moisture. Pads and the oil-absorbent cloth make clean application easier. One set. For initial treatment and aftercare.  What is the OLI NATURA® Care Set No. 4 suitable for? For cutting boards, end-grain boards, bread and serving boards, knife handles and other kitchen utensils made of absorbent wood. The care set is suitable for the initial treatment of raw or completely sanded wooden surfaces and for the regular aftercare of kitchen wood items already treated with boiled linseed oil. Rough, pale or dry-looking surfaces regain their pleasantly smooth feel and warm, natural wood character. What does the OLI NATURA® Care Set No. 4 contain? 250 ml OLI NATURA® boiled linseed oil 1 P220 sanding sponge 2 white application pads 1 oil-absorbent cloth 1 care leaflet with instructions and cleaning tips  How is the OLI NATURA® Care Set No. 4 used? Smooth. Oil. Wipe off. If necessary, lightly sand the clean, completely dry wood with the sanding sponge and carefully remove the dust. Then work the boiled linseed oil in sparingly and evenly with a white pad. After the penetration time, completely remove excess oil with the oil-absorbent cloth. For aftercare, a sparing application is generally sufficient. Raw or completely sanded wood requires several thin coats, depending on the type of wood and its absorbency. Why is boiled linseed oil suitable for caring for cutting boards? Boiled linseed oil is one of the tried-and-tested classics of wood care. It penetrates deep into the wood fibres, enhances the colour and grain, and forms a durable, water-repellent surface. Particularly absorbent end grain benefits from the deep-acting oil treatment. OLI NATURA® boiled linseed oil is vegan, solvent-free and suitable for wooden surfaces that come into contact with food once fully cured. The treated surface remains breathable and can easily be refreshed when needed. All components of the set are coordinated and ready to use - for your own kitchen or as a thoughtful gift for people who want to preserve good wood for a long time

CARING FOR AND RE-OILING WOODEN GARDEN FURNITURE Sun, rain and use leave their mark on wooden garden furniture over time. The color and grain fade, and the surface may feel dry and rough. OLI NATURA® Care Set No. 5 contains everything you need to refresh and re-oil oiled garden furniture - compactly assembled and coordinated with one another. What is included in the OLI NATURA® Care Set No. 5? 250 ml OLI NATURA® Yacht & Teak Oil in Teak - for refreshing the warm wood tone and for regular care. 2-in-1 sanding sponge - for smoothing rough areas and raised wood fibers. Brush - for applying a thin, even coat of oil. Polishing pad - for working in and polishing the oil. Oil-absorbent cloth - for safely removing excess oil. Which garden furniture is the Care Set suitable for? For garden tables, garden chairs, wooden benches, garden loungers and other outdoor furniture made of hardwood, exotic wood and suitable outdoor woods such as teak, bangkirai, eucalyptus or black locust. Ideal for refreshing previously oiled wood - usually without completely sanding it down. How easy is it to use? Clean the wood and allow it to dry completely. Smooth rough areas with the sanding sponge if necessary. Apply the oil thinly, allow it to penetrate for about 15 minutes and remove all excess oil. Then polish with the polishing pad. Everything you need for easy maintenance - from smoothing to the finished oil application.

This gentle yet powerful cleaning concentrate is ideal for all outdoor wood surfaces - from garden furniture to decking, whether made of untreated or oiled wood.It reliably removes green deposits, dirt and light signs of weathering, prevents them from quickly re-forming and optimally prepares the wood for subsequent oil treatment. Our 1-litre concentrate is highly economical and is mixed with water in a ratio of 1:3 or 1:4 - but can also be applied undiluted if required. Sustainably packaged: The bottle body is made of 100% recycled plastic (rPET) and is fully recyclable. The childproof push-and-turn cap ensures safe use.

The expert against tannin stains Discover our OLI-NATURA Tannin Remover, your first choice for effectively removing unwanted dark water and reaction stains from oak and other new tannin-containing woods. Formulated with oxalic acid, our tannin remover reliably neutralizes stubborn discoloration caused by the reaction of tannic acid with moisture and metals. Suitable for a wide range of wood surfaces - whether untreated, soaped, oiled or waxed - our product offers a versatile solution for indoor and outdoor use. The easy dosing and effective application make OLI-NATURA Tannin Remover an indispensable aid in combating tannin stains, preserving and restoring the natural beauty of your wood. Available in practical 50 ml dosing containers with a nozzle, our tannin remover offers easy and safe dosing, perfectly suited to your needs - finally, an alternative to large containers. The dosing nozzle enables precise application, while the screw-on black cap ensures safe storage.

PreOilCleaner thoroughly cleans and ensures optimal preparation of untreated or freshly sanded wooden surfaces such as furniture, stairs, parquet and paneling. It increases the wood’s absorbency and minimizes tannin reactions in tannin-rich woods such as oak. Suitable for all types of wood, it is diluted with water and applied before oiling. Mix the product with warm water and apply evenly in a slightly damp layer using a wrung-out cotton cloth or sponge. For floors, a slightly damp mop is recommended. Allow the wooden surface to dry thoroughly. After complete drying, carry out intermediate sanding if necessary, remove dust, and then treat with an OLI-NATURA oil of your choice. This product is NOT suitable for regular, daily cleaning. When using the OLI-NATURA Antique reactive stain, the surface should NOT be treated with PreOilCleaner beforehand.

Anyone who works with wood oil must clean their brushes thoroughly - otherwise, that’s the end of reusability.  OLI-NATURA brush cleaner is biodegradable, vegan, and reliably removes oils, waxes, paints, lacquers, fats, soot, tar and bitumen - all without a pungent smell. Whether in the workshop or at home, this cleaner is a true all-rounder. Its formula is based on water, coconut fatty acid, cellulose and natural orange peel oil from Citrus sinensis. This makes it not only gentle on natural-hair bristles, but also environmentally friendly. Important: It is best to immerse brushes immediately after use in the bio brush cleaner - this is the most effective way to dissolve the coating and keep the bristles nice and supple. How to use: Simply pour some cleaner into a container, immerse the brush and work it through until no residue is visible. Then rinse with water, wipe dry, leave to dry - done!

Versatile solvent-based helper The low-odour, aromatic-free OLI-NATURA oil thinner, based on isoparaffinic hydrocarbons, is ideal for cleaning tools after oiling and for adjusting the flow properties of our oils (not suitable for Scandic Oils). It makes oils that have thickened during storage workable again and can also be used to dissolve sticky oil films shortly after application - but only as long as the oil has not yet oxidized. Please test beforehand in an inconspicuous area. It can also be used to make a pigmented maintenance oil from coloured high-solid oils such as Colour-Oil, HS hardwax oil (coloured), or HS Professional Oil (coloured), using a mixing ratio of 2:1 (thinner:oil). Hardened oil residues cannot be removed or dissolved with the thinner.

Solvent-free, low-odor parquet floor cleaner for the regular maintenance cleaning of all water-resistant sealed wood and parquet floors, stair treads, and furniture surfaces, with excellent grease- and dirt-dissolving power. Leaves no streaks or wax buildup. Simply add the parquet floor cleaner to the water (approx. 50 ml per 10 liters), mop the surface, and allow it to dry - done. For heavier soiling, treat stains undiluted, then wipe with water. Conventional household cleaners should never be used, as they can leach the wood and damage the surface protection. Excessive wetting should also generally be avoided.

The high-quality »OLI-AQUA POLISH 15.95« is recommended for initial care, refreshing, and after every deep cleaning of all sealed parquet and cork floors. It is also excellently suited for the care of factory UV-sealed engineered wood flooring. »OLI-AQUA POLISH 15.95« preserves the beauty of the floor for a long time and provides an additional care film that helps prevent wear of the seal, protects against foot traffic marks and scratches, and gives the surface a satin-matte appearance. The composition of this basic parquet care product meets high ecological standards and is particularly economical to use. Simply apply it undiluted in an even, thin film to the thoroughly cleaned surface using a floor wiper or lint-free wide mop, allow it to dry - and you're done! One application is sufficient.

Mild deep-cleaning agent for final construction cleaning and for heavily soiled wood and parquet floors that can no longer be cleaned with regular mopping products. Reliably removes old care-product layers and polymer films.

For buffing, applying & spreading wood oils. Our OLI-NATURA oil-absorbing cloths are ideal for absorbing excess oil and finishing freshly oiled surfaces. They are highly absorbent, particularly tear-resistant, and lint-free, ensuring a professional finish on wood surfaces. The solvent-resistant and silicone-free cloths measure 38 x 34 cm and are made of a high-quality viscose synthetic fiber whose chemical composition resembles cotton. This “natural synthetic fiber” with its fine perforated structure is perfect for cleaning, caring for, and polishing sensitive surfaces. In addition to use with wood oils, the cloths are also ideal for versatile cleaning tasks in the workshop or household. They also perform excellently when oiling small wooden objects. Note: Oil-soaked cloths can spontaneously ignite due to heat buildup! After use, they should therefore be spread out and dried in a well-ventilated place, washed out, or stored under water.