OLI NATURA® Worktop-Oil

Preparation

• Sand the surface professionally and remove dust.
• Final sanding of wood for furniture up to max. P180
• For fine sanding, application with OLI-NATURA Hardener (5:1) is recommended.
• Wood moisture content 8–12%.
• Colour effect, enhancement and oil absorption vary depending on the type of wood and sanding pattern.
  

Note:
Before the final sanding of the wood, wipe the surface with a damp cloth using OLI-NATURA PreOilCleaner. Removes sanding residue and reduces reactions caused by tannins. Then allow to dry for at least 2 hours.

If pre-treated with OLI-NATURA Reactive Stain “Antique”, do not wet the surface and do not use PreOilCleaner.

Application

• Shake or stir well before use.
• (Optional) For 2K application, mix the oil and OLI-NATURA Hardener at a ratio of 5:1. Apply immediately. Pot life approx. 2–3 hours. Do not pour excess material back into the container.
• For wood-epoxy surfaces, fine sanding and applications subject to increased moisture exposure, application with OLI-NATURA Hardener is recommended.
• Apply the oil thinly and work it in evenly with a beige pad. For large surfaces, distribute with a squeegee beforehand if necessary.
• Allow to penetrate for 15–30 minutes.
• Polish off excess material dry with a white pad. If there is a large excess of material, first pick it up with a cloth or remove it with a rubber squeegee.
• For wood-epoxy surfaces: Remove excess material from resin areas and polish dry, as epoxy resin does not absorb oil.
• If necessary, repolish the following day with a white pad and 5–10 ml/m² of oil.

Coverage

• 1 coat at approx. 20–40 g/m² (approx. 25–50 m²/L).
• Coverage varies depending on the type of wood, sanding pattern and absorbency.

Drying

• Depending on temperature and humidity, dust-dry after 1–2 hours and fully cured after 5–7 days.
• Using OLI-NATURA Hardener reduces the curing time to 2–3 days.
• Protect from water and handle gently during this time.

Cleaning & Storage

Clean tools immediately after use with OLI-NATURA brush cleaner, OLI-NATURA Oil Thinner or white spirit.

Can be stored for at least 36 months when unopened. Store in a cool, dry, frost-free place. Close opened containers immediately and use promptly.

⚠ Safety

Oil-soaked cloths can spontaneously combust.
After use, store in an airtight container or immerse in water.

Care & Cleaning

Protect freshly oiled surfaces from water until fully cured.

For routine cleaning, remove dust dry and wipe with a damp cloth as needed. For heavier soiling, use OLI-NATURA wood soap.

To refresh the surface, use OLI-NATURA Refresher, OLI-NATURA wood care oil, or the original oil.

Scratches and signs of wear can be repaired by sanding the affected area and re-oiling.

• GISCODE Ö10+,
• EU Decopaint compliant
• LFGB tested (tested for food contact)
• DIN EN 71-3 (Safety of toys)
• DIN 53160 (resistant to saliva and perspiration)
• Free from formaldehyde, aromatics, biocides, preservatives, cobalt and oximes

The product is not subject to labeling requirements and, in accordance with Regulation (EC) No. 1272/2008, is not classified as hazardous. Not classified as dangerous goods; no GHS pictograms or signal words are required.

Oil-soaked cloths/pads can spontaneously ignite due to heat buildup! Therefore, clean them immediately after use or store them under water. P102 Keep out of reach of children.