Discover now
OLI NATURA® Scandic-Oil FOR FURNITURE
raw wood effect oil | For furniture & stairs | Water-based & VOC-free
from 47,73€
(47,73€
l)
OLI NATURA® Scandic-Oil FOR FURNITURE – raw wood effect oil for naturally light-colored furniture and stairs
Inspired by Scandinavian interior design, OLI NATURA® Scandic-Oil FOR FURNITURE preserves the natural look of light-colored solid wood furniture and stairs. The surface looks untreated and resembles freshly sanded wood in both appearance and feel. Even on deeply brushed and textured oak, the pores are barely accentuated with a whitish tint. The result is a calm, natural raw wood look without a limed effect.
Which types of wood and applications is OLI NATURA® Scandic-Oil FOR FURNITURE suitable for?
Whether it’s a dining table, stair tread, or favorite piece of furniture: the water-based raw wood effect oil is suitable for solid wood furniture, tabletops, stair treads, wall panels, and trim in indoor living spaces. It is ideal for light-colored woods such as maple, oak, ash, spruce, and fir. The wood should be untreated or fully sanded back. For wood floors, choose OLI NATURA® Scandic-Oil CLASSIC.
How does OLI NATURA® Scandic-Oil FOR FURNITURE change the look and feel of wood?
Do you like wood just the way it is? Scandic-Oil only slightly enhances the natural tone of the wood and gives the surface an untreated look. You can feel the wood grain when you touch it. If needed, you can refresh the oiled surface with OLI NATURA® Refresher.
Tip: Try the oil with a 20 ml sampler on a scrap piece of your wood. Sand it just as you would the finished surface, and assess the result only after it has dried completely.
Would you like to bring out the natural tone of the wood more? OLI NATURA® hardwax oil gives the wood a richer color and accentuates the grain.
How easy is OLI NATURA® Scandic-Oil FOR FURNITURE to apply?
Oil twice and finish applying it in one day: Apply Scandic-Oil with a brush, foam roller, or spray to freshly sanded, absorbent wood. You can apply a second coat after about two hours. One liter covers approximately 8–12.5 m² for two coats, depending on the type of wood, sanding, and absorbency. Find out how to do the intermediate sanding and buffing in the Application tab.
When is OLI NATURA® Scandic-Oil FOR FURNITURE with hardener recommended?
For tabletops, stair treads, and surfaces likely to be exposed to grease, we recommend adding OLI NATURA® H2O-Hardener. Mix ten parts oil with one part hardener. The hardener supports curing and can make the surface more resistant to water, grease, and other everyday stresses.
What else sets OLI NATURA® Scandic-Oil FOR FURNITURE apart?
Customers appreciate the easy application, fast drying, and pleasant smell. Scandic-Oil is VOC-free, emissions-tested, and listed in baubook – for a conscious choice of materials in eco-friendly construction. Oil-soaked pads and cloths are not prone to spontaneous combustion.
OLI NATURA® boiled linseed oil
Cutting board oil for wood in contact with food
from 11,13€
(44,52€
l)
OLI NATURA® Boiled Linseed Oil for Wood: traditional wood finishing from our Heritage Collection
“New Old School” - a nearly forgotten classic, reimagined. In the past, boiled linseed oil was a standard finish for wooden surfaces and building components - both indoors and outdoors. In 2015, we revived the traditional formula, refined it carefully, and had it tested for contact with food.
Today, »OLI NATURA Boiled Linseed Oil« represents one of the most original ways to protect wood naturally. It penetrates deeply, cures within the wood, and forms a durable, water- and dirt-repellent oil film. The surface remains breathable, does not crack or peel, and can easily be maintained and refinished when needed.
Which wood surfaces is OLI NATURA® Boiled Linseed Oil suitable for?
The transparent boiled linseed oil is suitable for the natural initial treatment of absorbent wood surfaces indoors and outdoors. It protects cutting boards, end grain, kitchen wood, turned woodwork, bowls, and knife handles, as well as wooden toys, birdhouses and bee houses, windows, and doors. The boiled linseed oil is solvent-free, suitable for children's toys, and LFGB-tested and suitable for wood surfaces that come into contact with food.
How does OLI NATURA® Boiled Linseed Oil affect wood?
OLI NATURA Boiled Linseed Oil is transparent and unpigmented, but it enhances the wood: the color and grain visibly gain depth, making the wood appear more vibrant, warmer, and richer. Particularly light-colored woods develop a natural honey tone. Since the color effect depends on the type of wood and its base tone, we recommend testing the product first in an inconspicuous area.
How is OLI NATURA® Boiled Linseed Oil applied?
Apply the boiled linseed oil thinly and evenly with a cotton cloth or brush. After the penetration time, carefully remove any excess oil and repeat the application after it has dried sufficiently. Two to three coats are usually enough.
What distinguishes the traditional formula?
Our purity standard for boiled linseed oil: pure, cold-pressed linseed oil, gently boiled and with only as much drying agent as necessary. It accelerates and evens out curing. We deliberately dispense with additional additives and solvents.
OLI NATURA® Furniture Wax
Hard wax with beeswax and carnauba wax for wood | VOC-free
17,23€
(137,84€
l)
OLI NATURA® Furniture Wax for Wood: Traditional Wax Care, Reinterpreted for Today
A classic from our Heritage Collection, reimagined. For generations, natural waxes have preserved the beauty of valuable furniture and antiques. »OLI NATURA Furniture Wax« continues this tradition with beeswax and carnauba wax, interpreted for today. The solvent-free hard wax gives wood a velvety feel and protects it with a fine, water-repellent wax layer. Applied thinly and polished after drying, it develops a soft to silky sheen.
Which wood surfaces is OLI NATURA® Furniture Wax suitable for?
The colorless, unpigmented wood wax is suitable for the initial treatment of raw wood and for caring for oiled, stained, or waxed wood surfaces indoors. It enhances furniture, antiques, picture frames, wood trim, carvings, and turned woodwork. With its mild odor, it is also suitable for the inside of cabinets and drawers.
Other applications include surfaces finished with chalk paint, wooden toys, cutting boards, wooden cooking spoons, and other wooden kitchen utensils. If the type of wood or previous treatment is unknown, first test the product on a small area.
How does OLI NATURA® Furniture Wax affect wood?
Unlike wood oil, which penetrates the wood and protects it from within, furniture wax works close to the surface and changes the natural color tone less. The grain and structure remain visible, while polishing gives the surface a subtle sheen. Regular rewaxing helps develop an even, distinctive patina.
How is OLI NATURA® Furniture Wax applied?
Apply the wax to clean, dry wood. If the consistency is too firm, the closed container can be gently warmed on a lukewarm radiator. Using a soft cotton cloth, spread sparingly, thinly, and evenly in circular motions.
Allow to dry until the surface is dry to the touch. Then polish with a fresh cotton cloth or white polishing pad. The more intensively it is polished, the silkier the sheen. On raw or highly absorbent wood, a second thin coat may be advisable after drying.
Tip: A clean, lint-free, discarded cotton jersey shirt is also ideal for polishing.
What makes the formulation of OLI NATURA® Furniture Wax special?
Purified beeswax cares for the wood surface, while hard carnauba wax gives the fine wax film strength. The formulation contains no added colorants or fragrances and is free from terpenes - including terpene-containing citrus oils such as orange peel oil -, silicones, and VOCs.
Cloths soaked with the wood wax are not prone to spontaneous combustion.
OLI NATURA® hardwax oil
Oil-wax combination | For furniture, stairs & parquet | Pigment-free | ECARF-certified
from 20,28€
(81,12€
l)
OLI NATURA® hardwax oil for almost all indoor wood surfaces
Oil impregnates. Wax protects. OLI NATURA® hardwax oil is the ECARF-certified oil-wax combination for almost any indoor wood project. The oil impregnates the wood from within, while the wax provides additional surface protection. Easy to apply, highly efficient, and quick-drying – for wood surfaces that feel silky smooth.
Which types of wood and applications is OLI NATURA® hardwax oil suitable for?
One hardwax oil for many projects – instead of keeping a different wood oil in the cupboard for every application. Whether for furniture, dining tables, kitchen countertops, stairs, wood floors, doors, wall paneling, or windowsills: OLI NATURA® hardwax oil is suitable for untreated and freshly sanded indoor wood surfaces. Suitable for many types of wood – from maple and beech to oak and ash, as well as spruce and pine. Can also be used on suitable surfaces made of cork, bamboo, OSB, plywood, and multiplex.
Looking for a transparent, colored look? OLI NATURA® COLOUR hardwax oil adds color to wood – also in Cotton White for a Scandinavian look. For a more pronounced wood grain effect, choose OLI NATURA® Project Oil.
How does OLI NATURA® hardwax oil change the look and feel of wood?
The wood remains wood. The grain and wood tone are subtly enhanced, while the texture remains visible and tactile. This brings out the natural beauty of particularly light-colored woods. The result: a satin-matte finish with a velvety feel. Tip: Test first, then oil. Try it on similarly prepared wood with our OLI NATURA® hardwax oil sample. Assess the color and sheen after drying.
Is OLI NATURA® hardwax oil easy to apply?
Yes. Apply a thin coat. Remove excess. Polish. No primer or intermediate sanding. On untreated wood, two coats are usually best; one is often enough for light use. Prefer a more matte finish? Polish the second coat while still wet with a white oil pad. Once fully cured, the surface stands up to everyday use: durable, dirt- and water-repellent. The oiled surface does not crack, peel, or flake. And what if signs of wear remain? Touch up the affected areas instead of sanding down the entire surface. Find detailed instructions under “Application.”
What can you rely on with OLI NATURA® hardwax oil?
Tested for everyday use: ECARF-certified as allergy-friendly, tested for food contact (LFGB), and suitable for children’s toy surfaces treated accordingly (DIN EN 71-3).
OLI NATURA® wood soap
Cleaning concentrate | For oiled wood surfaces | Replenishing & highly concentrated
18,25€
(
)
FOR REGULAR CLEANING OF OILED WOODEN SURFACES
Footprints, food stains, adhering dirt - oiled wood has to withstand quite a lot in everyday use. Usually, a dry cloth or clear water is sufficient. Where dirt can no longer be removed this way, OLI NATURA® wood soap comes into play.
It cleans and cares for the surface in a single step, removes everyday dirt and also has a replenishing effect. This preserves the natural character of the wood - it can be used undiluted or diluted in a variety of ways.
Which wooden surfaces is OLI NATURA® wood soap suitable for?
For oiled, waxed, soaped or lye-treated wood indoors - from parquet and floorboards to stairs, furniture and other wooden surfaces that can be wiped with a damp cloth. Suitable for private and commercial use.
When does wood need more than OLI NATURA® wood soap?
Wood soap handles regular cleaning and maintenance care. For heavy, old, ingrained or deep-seated dirt, basic or intensive cleaning is the better choice - especially before re-oiling. If the surface appears dry, dull or visibly worn, maintenance oil for oiled wood is recommended.
Does OLI NATURA® wood soap change the appearance of the wood?
Wood soap cleans without leaching the surface or leaving a grey haze. This leaves the wood looking clean, fresh and naturally cared for after cleaning.
How easy is OLI NATURA® wood soap to use?
For regular cleaning, add 5–10 ml of wood soap per litre of lukewarm water and wipe with a damp cloth - using a cloth or white pad on small areas, and a floor wiper or flat mop on floors. For more stubborn dirt, apply undiluted to the affected area. The pH-neutral formula is gentle on skin and wood.
What else makes OLI NATURA® wood soap special?
The concentrated formula is highly economical, solvent-free and pleasantly fresh-scented. The bottle is made of 100% recycled plastic and is fully recyclable. A push-and-turn closure ensures child-safe handling.
OLI-AQUA NORDIC
raw wood effect lacquer - ultra-matte wood lacquer for furniture and stairs
from 28,42€
(28,42€
l)
Protect wood. Preserve the raw wood effect with OLI-AQUA NORDIC.
OLI-AQUA NORDIC 18.40 is a water-based 1K/2K raw wood effect lacquer for indoor wood surfaces.
Do you like wood as it looks when freshly sanded - natural and without a visible lacquer sheen? The raw wood effect lacquer preserves this character while protecting the surface in everyday use. The virtually invisible, ultra-matte finish makes solid wood and veneers appear largely untreated. Color and grain remain the focus - ideal for furniture, cabinets, doors, kitchen fronts, and stairs.
Especially easy to apply: You only need one product for the basecoat and topcoat. The wood lacquer dries quickly, is easy to sand, and can be brushed, rolled, or sprayed. Two coats with intermediate sanding produce the finished surface. A test application on the original wood shows you the effect in advance - especially on dark or dark-stained woods.
Optional hardener: For greater chemical and mechanical resistance, you can add 10% OLI-AQUA Hardener 13.2. The mixing ratio by volume is 10 parts lacquer : 1 part hardener. Application instructions can be found in the technical data sheet.
Relevant for stairs: The tested 1K and 2K coatings achieve slip resistance class R10.
Colorful and ultra-matte: OLI-AQUA NORDIC B 18.45 - the color lacquer for furniture as a colorful alternative to NORDIC 18.40.
OLI NATURA® COLOUR hardwax oil
Pigmented oil-wax combination | For furniture, stairs & wood surfaces | Transparent color effect
from 22,32€
(89,28€
l)
Wood can have colour - and still remain wood.
Three functions. One product. OLI-NATURA® COLOUR hardwax oil is a pigmented oil-wax combination. Plant-based oils impregnate the wood from within, carnauba wax provides additional surface protection, and lightfast colour pigments create a natural, transparent colour effect.
Colour and protection in one application. Open-pore, robust and without a lacquer character - for natural wood surfaces indoors.
Which types of wood and applications is OLI-NATURA® COLOUR hardwax oil suitable for?
OLI-NATURA® COLOUR hardwax oil is the right choice when the colour of the wood is to be changed and protected at the same time - without prior staining and subsequent separate final treatment. This saves an additional application step.
Whether furniture, dining tables, kitchen worktops, stairs, doors, wall panelling or windowsills - the pigmented hardwax oil is suitable for almost all types of wood and wood-based materials indoors, including solid wood, glued laminated timber, veneer, plywood, multiplex, OSB, bamboo and cork.
Do light woods need to remain as light as possible? Cotton White reduces the natural intensifying effect and yellowish tinge - ideal for a light Scandinavian look. Light White also visibly lightens the wood. For colourless protection, OLI-NATURA® hardwax oil Natural is the right choice.
What does wood look like after applying OLI-NATURA® COLOUR hardwax oil?
The natural wood appearance is retained. The grain and structure remain visible and tactile - only the colour changes.
The final colour effect results from the interaction between the wood and the oil. The type of wood, its natural colour and the sanding determine how the same colour will look later. A sample surface on the original wood therefore shows the colour most reliably. All colours are also available as samplers.
Cotton White reduces the natural intensifying effect and yellowish tinge on light woods. Light White also visibly lightens the wood. Dark colours appear more intense on light woods, while light colours appear correspondingly more subtle on dark woods. All colours can be mixed with one another and individually softened with OLI-NATURA® hardwax oil Natural. A second application intensifies the colour effect; with OLI-NATURA® hardwax oil Natural, it is retained.
Lightfast colour pigments slow down the natural colour change of the wood caused by UV light and help maintain the colour effect for as long as possible.
How easy is OLI-NATURA® COLOUR hardwax oil to apply?
It is easy to apply evenly. One application is usually sufficient for furniture. A second application is recommended for stairs and heavily used worktops - without intermediate sanding.
Hardwax oil is not lacquer. Apply thinly - that is sufficient. The surface is hard-wearing, dirt- and water-repellent, and easy to maintain. Scratches and signs of use can be repaired locally or simply refreshed at any time - without sanding. The oil does not crack, peel or flake. If the colour is to be retained, the second application should be made with OLI-NATURA® hardwax oil Natural.
What can you rely on with OLI-NATURA® COLOUR hardwax oil?
Once fully cured, the surface is harmless to people, animals and plants. It remains open-pore and breathable, supporting a pleasant indoor climate. Suitable for children's toys. For kitchen worktops, OLI-NATURA® hardwax oil Natural is recommended as the final coat.
OLI NATURA® HS Professional Oil
High-solid wood oil for parquet, stairs, and furniture. 1K or 2K. One coat. VOC-free.
from 12,15€
(121,50€
l)
OLI NATURA® HS Professional Oil - one application. Plenty of time to work.
Parquet, stairs, furniture, or countertops: OLI NATURA® HS Professional Oil protects interior wood with just one application. The colorless, solvent-free high-solid oil enhances the natural wood tone and highlights the grain. Depending on the type of wood, sanding, and absorbency, one liter covers approximately 25-50 m².
Up to 90 minutes of open time give you more control during application and make it easier to work without visible overlaps, even on large surfaces - by hand or mechanically. This leaves enough time for reworking and subsequent polishing. Apply the oil directly without hardener, or increase resistance and accelerate curing with OLI NATURA® Hardener. A ratio of 10 parts oil to 1 part hardener is sufficient.
Which types of wood and applications is OLI NATURA® HS Professional Oil suitable for?
For untreated or freshly sanded wood surfaces and absorbent wood-based materials indoors. On wooden floors and stairs, slip resistance is also important: R10 tested on sanded oak - both without and with hardener. Also suitable for bathroom furniture and wood surfaces with epoxy resin. Here, we recommend OLI NATURA® Hardener for greater resistance. Proven on roller coating machines: Used for years for factory-applied oil treatment of parquet and absorbent wood-based materials.
How does OLI NATURA® HS Professional Oil change the appearance and feel of the wood?
NATUR is unpigmented and intensifies the wood's natural tone: The wood tone gains depth and the grain becomes more pronounced. The surface remains matte, with the wood structure perceptible to the touch. Light-colored woods may appear darker and warmer.
For smoked effects on oak, combine HS Professional Oil with the VOC-free reactive stain OLI NATURA® ANTIQUE in the colors Smoked and Black Smoked. The subsequent oil treatment intensifies the color effect and protects the surface. For colored surfaces, choose OLI NATURA® HS Professional Oil COLOUR.
Tip: Test on wood prepared in the same way and assess the result after drying.
How easy is OLI NATURA® HS Professional Oil to apply?
Apply thinly. Work in. Polish. The long open time gives you the flexibility to work the oil in carefully and evenly, even across larger sections of flooring - for a seamless result with less time pressure. Work by hand or mechanically, with or without OLI NATURA® Hardener - according to the surface and its level of use
All work steps, mixing ratios, and drying times can be found in the Application tab.
OLI NATURA® Worktop-Oil
BLACKLABEL – Countertop Oil – 1K or 2K. One coat. VOC-free.
from 28,42€
(113,68€
l)
OLI-NATURA Worktop-Oil BLACKLABEL
Worktop oil for wood and wood-epoxy surfaces
From the Blacklabel Edition. Developed with Jungo Design - for worktops, tables, bathroom furniture, and modern wood and wood-epoxy surfaces.
Worktop-Oil protects and saturates wood in just one coat.
The 100% high-solid formulation based on linseed oil and tung oil provides maximum wood saturation, intense enhancement, and a durable, water-repellent surface. Highly transparent - for a natural wood look without a hazy effect.
The pigment-free oil intensifies the natural color of the wood, highlights the grain and structure, and provides a matte, tactile finish with excellent everyday durability.
Ideal for tabletops, worktops, solid wood furniture, bathroom furniture, and river tables.
For wood-epoxy surfaces, fine sanding finishes, or applications subject to increased moisture exposure, OLI-NATURA Hardener (5:1) can optionally be used.Tip for professionals: For maximum durability, OLI-NATURA Worktop-Oil 2C is available as a preconfigured 2K set (500 ml oil + 100 ml Hardener) in the distinctive BLACKLABEL round tin.
OLI NATURA® Yacht & Teak Oil
Teak oil & deck oil | For garden furniture, decks & yacht decks | For outdoor wood
from 16,21€
(64,84€
l)
TEAK OIL & DECKING OIL FOR OUTDOOR WOOD
Sun and rain change wood. Even weather-resistant woods such as teak fade and turn gray over time. Regular oiling with OLI NATURA® Yacht & Teak Oil counteracts the silvery-gray patina and helps protect the wood surface from drying out and becoming brittle.
The oil penetrates deep into the wood and protects it from within. The surface remains open-pore and water-repellent, while the color and grain are visibly refreshed - without a closed film layer.
Which types of wood and applications is OLI NATURA® Yacht & Teak Oil suitable for?
For wood terraces, decking boards, garden furniture, pool surrounds and yacht decks made of suitable outdoor woods such as teak, bangkirai, Douglas fir, larch, eucalyptus, black locust, oak, Ipé or cumaru.
The right choice when you want to preserve and visibly emphasize the warm character of the wood and are looking for a biocide-free wood oil for outdoor use.
A particular advantage is the easy maintenance: The oil penetrates the wood and remains open-pore. The oil coating does not crack, peel or flake. Previously oiled surfaces can therefore usually be recoated easily without sanding.
What does wood look like after applying OLI NATURA® Yacht & Teak Oil?
Oiling gives the wood greater depth and warmth. The color and grain appear more vivid, while the surface remains open-pore and natural to the touch.
Natural contains no pigments, but it is not visually colorless: Like any color-enhancing oil, it deepens the existing wood tone. Teak is lightly pigmented, subtly enhances warm wood tones and provides increased UV protection. The Teak color is also suitable for other types of wood without covering them in a teak tone.
The type of wood, its natural color and sanding affect the color tone. A sample area on the original wood provides the most reliable indication. All color tones are available as samplers.
How easy is OLI NATURA® Yacht & Teak Oil to apply?
Apply thinly, allow to penetrate, remove excess. Apply the oil evenly in the direction of the grain and polish completely after about 15 minutes.
Apply only to clean, dry wood. Then protect the freshly oiled surface from rain and moisture for 5–8 days.
Very dry or highly absorbent wood can be oiled a second time after drying overnight. Treat dense woods such as teak only thinly. One coat is usually sufficient for refreshing the surface.
Previously oiled surfaces can generally be maintained without sanding. Depending on weather and use, refreshing once a year is usually sufficient; for fully exposed wood, twice a year if needed.
What can you rely on with OLI NATURA® Yacht & Teak Oil?
Proven over many years. We have been manufacturing OLI NATURA® Yacht & Teak Oil with virtually no changes for over 20 years. We deliberately formulate it without biocides or preservatives. This makes the wood oil suitable not only for outdoor use, but also for suitable wood surfaces indoors.
OLI NATURA® Care Set No. 5 with Yacht & Teak Oil
Care set for oiled garden furniture | With Yacht & Teak Oil in Teak | For care, refreshing & re-oiling
22,32€
(89,28€
l)
CARING FOR AND RE-OILING WOODEN GARDEN FURNITURE
Sun, rain and use leave their mark on wooden garden furniture over time. The color and grain fade, and the surface may feel dry and rough.
OLI NATURA® Care Set No. 5 contains everything you need to refresh and re-oil oiled garden furniture - compactly assembled and coordinated with one another.
What is included in the OLI NATURA® Care Set No. 5?
250 ml OLI NATURA® Yacht & Teak Oil in Teak - for refreshing the warm wood tone and for regular care.
2-in-1 sanding sponge - for smoothing rough areas and raised wood fibers.
Brush - for applying a thin, even coat of oil.
Polishing pad - for working in and polishing the oil.
Oil-absorbent cloth - for safely removing excess oil.
Which garden furniture is the Care Set suitable for?
For garden tables, garden chairs, wooden benches, garden loungers and other outdoor furniture made of hardwood, exotic wood and suitable outdoor woods such as teak, bangkirai, eucalyptus or black locust.
Ideal for refreshing previously oiled wood - usually without completely sanding it down.
How easy is it to use?
Clean the wood and allow it to dry completely. Smooth rough areas with the sanding sponge if necessary. Apply the oil thinly, allow it to penetrate for about 15 minutes and remove all excess oil. Then polish with the polishing pad.
Everything you need for easy maintenance - from smoothing to the finished oil application.
OLI AQUA NORDIC B - color lacquer
Ultramatter color lacquer, water-based - for furniture, doors, and interior finishing.
50,78€
(50,78€
l)
OLI-AQUA NORDIC B - Ultra-matte color lacquer for furniture and doors, water-based
OLI-AQUA NORDIC B is a water-based 1K/2K color lacquer for wood and wood-based materials indoors.
Ideal for furniture, cabinets, kitchen fronts, doors, stair cladding and trim - for both new construction and refinishing existing surfaces. The binder used is partly based on renewable raw materials.
Chalk look with lacquer protection: The opaque, ultra-matte finish combines the look of chalk paint with a durable lacquer surface.
Easy and efficient to apply: NORDIC B can be brushed, rolled or sprayed, dries quickly and is easy to sand. On suitable, prepared substrates, you need only one product for the primer and topcoat. The number of coats depends on the substrate and application method.
For a uniform lacquer surface: On raw MDF, especially on edges and milled profiles, as well as on wood species rich in extractives, we recommend priming with the water-based OLI-AQUA 15.88 I 1K Insulating Primer-Filler. It creates a uniform base and isolates wood extractives.
Optional hardener: For greater chemical and mechanical resistance, you can add 10% OLI-AQUA Hardener 13.2. The mixing ratio by volume is 10 parts lacquer : 1 part hardener. Application instructions can be found in the technical data sheet.
Transparent and ultra-matte: OLI-AQUA NORDIC 18.40 - the raw wood effect lacquer as a colorless alternative to NORDIC B 18.45.
OLI NATURA® Worktop-Oil 2C
2K Wood Oil Set · For wood and epoxy resin tables and wooden washbasins · BLACKLABEL Edition
76,21€
(127,02€
l)
OLI-NATURA Worktop-Oil 2C BLACKLABEL
2K worktop oil for wood and wood-epoxy surfaces
From the Blacklabel Edition. Developed with Jungo Design - for river tables, epoxy resin tables, wood-epoxy worktops, and other high-quality wood and wood-epoxy projects.
The preconfigured 2K system consisting of 500 ml Worktop-Oil and 100 ml Hardener combines the requirements of wood and epoxy resin in one seamless surface concept.
The 100% high-solid formulation based on linseed oil and tung oil ensures maximum wood saturation, enhances the grain, and creates a durable, water-repellent surface. The chemically cross-linking oil-hardener system increases resistance, particularly under moisture exposure and the fine sanding commonly used in wood-epoxy applications.
Highly transparent - for a natural wood appearance without a cloudy effect. The pigment-free system can be applied across the entire wood and epoxy resin surface. After polishing the resin areas, it creates a visually and tactilely homogeneous surface without distracting transitions between wood and epoxy resin.
Ideal for river tables, epoxy resin tables, wood-epoxy worktops, designer furniture with resin inlays, and high-quality custom and one-off pieces.
Result: A matte, tactile finish with natural depth, high transparency, and excellent everyday durability.