What is the difference between Scandic-Oil CLASSIC and FOR FURNITURE?
Scandic-Oil CLASSIC is thinner and designed for roller application on parquet and plank floors. It can also be used on furniture and stairs.
FOR FURNITURE is more viscous and specially optimized for furniture and stairs. It can be applied in two coats with a brush, foam roller, or spray gun and offers better hold on vertical surfaces. Due to its higher viscosity, it is not intended for parquet and plank floors. Use Scandic-Oil CLASSIC for these instead.
How much OLI NATURA® Scandic-Oil FOR FURNITURE do I need for my surface?
To fully treat your surface with Scandic-Oil FOR FURNITURE, plan for the coverage for two coats . Depending on the container size, OLI NATURA® Scandic-Oil FOR FURNITURE covers the following areas:
For two coats:
- 1 liter: approx. 8–12.5 m²
- 2.5 liters: approx. 20–31 m²
Note: All coverage figures are approximate. Actual coverage depends on the type of wood, final sanding, the wood's absorbency, and the application method.
Which types of wood is Scandic-Oil FOR FURNITURE suitable for?
Scandic-Oil FOR FURNITURE is particularly suitable for light-colored woods such as oak, ash, spruce, and fir.
On dark or reddish woods, the white pigments may create a slight haze or change the color appearance. Therefore, test the product first on a sample area of wood prepared in the same way, and assess the result only after it has dried completely.
Are test samples available?
Yes, you can order test samples directly from the shop in the “Samples” category.
Prepare the sample area in the same way as the final surface and apply the planned system in two coats. Assess the color appearance, gloss, and feel only after it has dried completely. The wood initially looks darker when wet; the raw wood effect appears after drying.
How is the raw wood effect achieved?
The water-based formula only slightly intensifies the wood's color. A small amount of white pigments further counteracts the remaining deepening of the color.
This allows light-colored woods to retain much of their natural color and look and feel like freshly sanded wood. Even on brushed and textured oak, the pores are barely emphasized with a whitish tint.
The wood initially looks darker during application. The raw wood effect appears after drying.
Can I achieve a raw wood effect on previously treated furniture with Scandic-Oil?
For the raw wood effect, the wood must be untreated or sanded completely back to bare wood.
An existing oil treatment cannot be turned into a raw wood look by applying another coat of Scandic-Oil. lacquers, waxes, and other old finishes must also be completely removed. After sanding, prepare a test area.
How many coats do I need, and how much oil should I plan for?
Apply Scandic-Oil FOR FURNITURE twice, using approx. 40–60 ml/m² per coat. One liter covers about 17–25 m² with one coat or 8–12.5 m² with two coats. The actual coverage depends on the type of wood, sanding, and absorbency.
If you want a third coat, use OLI NATURA® Refresher as an optional initial care treatment. We do not recommend applying a third coat of Scandic-Oil: the additional pigment may make the surface look whiter and compromise the desired raw wood effect.
Why does the wood feel rough after the first coat?
The water content can cause the wood fibers to rise. These are smoothed before the second coat.
Let the first coat dry for approx. 2 hours. Smooth any raised fibers on the dry surface by hand with P220, using light pressure and sanding with the grain. Do not sand through the first treatment, and remove all sanding dust thoroughly. For the full instructions, see the “Application” tab.
How can I avoid white haze, streaks, and unwanted gloss?
Work evenly and quickly in manageable sections. Stir or shake the oil thoroughly before and during application, and use the recommended amount.
For application with a brush or roller, work the second coat evenly into the surface with a white pad while the first coat is still wet, and remove all excess material. Work only on sections you can finish before they start to dry.
Buildup of material and additional Scandic-Oil coats can cause whitish or layered-looking patches. Do not polish for too long or continue working on areas that have started to dry. Assess the final gloss level only after the surface is completely dry.
When can the surface be used, and when is it fully cured?
Scandic-Oil FOR FURNITURE is fully cured after approx. 5–7 days without hardener, or approx. 3–5 days with OLI NATURA® H2O-Hardener. With hardener, the surface can withstand light use after approx. 24–48 hours.
The surface is dust-dry after approx. 1 hourand can be recoated after approx. 2 hours. Drying times depend on temperature, humidity, and the amount applied.
Surface-dry does not mean fully resistant to use. The surface reaches its full resistance to use and durability only after it is fully cured. Until then, protect it from water and heavy use, and do not clean it with a damp cloth.
What should I do if Scandic-Oil takes longer than stated to dry or the surface remains sticky?
Do not apply any more oil or Refresher for now, and allow the surface to continue drying. Ensure good ventilation and follow the application conditions in the “Application” tab.
Applying too much oil, failing to remove excess, low temperatures, high humidity, or an unsuitable substrate may be the cause.
If the surface remains sticky or soft despite suitable drying conditions, contact our technical application team before carrying out any further work. Photos and details about the wood species, pretreatment, amount applied, drying time, and room conditions will be helpful.
When do I need OLI NATURA® H2O-Hardener?
We recommend adding OLI NATURA® H2O-Hardener for tabletops, stair treads, and surfaces likely to be exposed to grease. It increases durability and shortens the curing time.
Shortly before use, mix the oil and hardener thoroughly in a ratio of 10:1 (oil : hardener) and apply immediately. The pot life is 2–3 hours. Do not use the mixed material after that time or return it to the original container.
How do I protect treated tabletops from water and grease stains?
For tabletops, stair treads and surfaces exposed to grease, we recommend adding OLI NATURA® H2O-Hardener. Allow the surface to cure completely.
Wipe up spilled liquids and grease promptly, and avoid standing water. Place hot objects on suitable coasters. Even a surface treated with hardener requires gentle cleaning and care as needed.
If stains appear unusually quickly despite complete curing and correct application, our application specialists can help assess the issue.
When can I apply OLI NATURA® Refresher for the first time?
Optional initial care with OLI NATURA® Refresher is possible approx. 2–3 hours after the second Scandic-Oil coat provided the surface is dry. You do not need to wait for it to cure completely.
Do not damp-clean the freshly oiled surface before applying Refresher. Apply Refresher undiluted in a thin coat, spread evenly and remove all excess.
How do I clean, care for and repair treated furniture and stairs?
Use OLI NATURA® wood soap for cleaning, OLI NATURA® Refresher for refreshing and the product originally used, Scandic-Oil FOR FURNITURE, for local repairs.
Dust furniture with a dry cloth; vacuum or sweep stairs. Only after it has cured completely, clean as needed with a barely damp, not wet, cloth and wood soap. Follow the recommended dosage and avoid aggressive or abrasive cleaners.
If water repellency decreases or the wood looks dry and dull, refresh it with Refresher. Clean the surface first and allow it to dry completely.
Small scratches and worn areas can usually be sanded locally, thoroughly dusted and treated with the same product. Find the detailed instructions in the “Care & Cleaning” tab.
Does Scandic-Oil smell during application and drying?
Scandic-Oil has a mild odor, but is not odorless. A temporary odor may occur during application and drying.
How strongly it is noticed varies from person to person. Ensure good ventilation and follow the recommended application rate.
Can cloths and pads soaked with Scandic-Oil spontaneously ignite?
Cloths and pads soaked with OLI NATURA® Scandic-Oil FOR FURNITURE are not prone to spontaneous ignition.