The high-quality »OLI-AQUA POLISH 15.95« is recommended for initial care, refreshing, and after every basic cleaning of all sealed parquet and cork floors. It is also excellent for caring for factory UV-sealed prefinished parquet.
»OLI-AQUA POLISH 15.95« preserves the beauty of the floor for a long time and provides an additional care film that helps prevent wear of the finish, protects against walking marks and scratches, and gives the surface a satin-matte appearance.
The composition of this parquet floor care product meets high ecological standards and is particularly economical to use. Simply apply undiluted to the thoroughly cleaned surface in an even, thin film using the Wischwiesel or a lint-free wide mop, allow to dry - finished! A single application is sufficient.
How to apply OLI AQUA parquet care
Preparation: Remove loose dirt and dust by vacuuming or sweeping. Then clean with OLI AQUA Parquet Cleaner 15.94 using a damp mop. For stubborn dirt or old care films, carry out a deep clean with OLI AQUA intensive cleaner 15.97 Allow the surface to dry completely.
Application: Shake the container well. pure and undiluted Apply the parquet care product thinly and evenly with a mop. Do not polish.
Drying: Allow to dry for at least 12 hours For enhanced protection, another coat can be applied as soon as the first care film is walkable.
Application conditions: Ideal application temperature is approx. 20 °C The floor and material temperature must not fall below 15 °C Switch off underfloor heating in good time; avoid direct sunlight and drafts.
Coverage: Approx. 25–30 g/m² per coat, corresponding to approx. 30–40 m²/L.
Tool cleaning: Clean the mop with water immediately after use..
Regulation (EC) No. 1272/2008
Safety instructions
P102 Keep out of reach of children.
Special labelling of certain mixtures
EUH208 Contains reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction.