Colour hardwax oil sample box

Before use shake well, as pigments may settle at the bottom. Simply apply, let it soak in, and polish with the included pad. A second coat intensifies the color effect.

👉 You can find more details and application instructions on the respective product pages.

CREATE TEST AREAS – HERE’S HOW

Step by step:

1. 
   Sanding 
   Sand your chosen wood evenly – final sanding up to max. 240 grit.
   Make sure the sanding is clean – sanding flaws are unforgivingly visible with colored oils.
   
2. 
   Tape off areas & prepare pads
   Tape off equally sized test areas and cut 8 equally sized pad pieces .
   
3. Shake the bottle thoroughly
   The color pigments tend to settle – so shake the bottle vigorously before useso everything is distributed evenly.
   
   
4. 
   Apply the oil
   Apply some oil to each test area. Spread it with a brush or cloth pad. Let it soak in briefly, then polish it with the white polishing pad . 
   
5. 
   Too much oil? Remove it!
   Is there still too much oil on the surface? First remove it with a soft cloth, then polish it with the white pad.
   
6. 
   Allow to dry
   Let your sample dry overnight. If needed, you can apply a second coat the next day – a second coat intensifies the color effect. Now you can clearly see how the color looks on your wood.
   
   

💡 Good to know:

• 
  It will be fully cured after 5–8 days. 
  

Regulation (EC) No. 1272/2008 Hazard-determining components for labelling

Materials contaminated with the product, such as cleaning rags, paper cleaning towels and protective clothing, may spontaneously ignite after several hours.

Safety instructions

P102 Keep out of reach of children.

📄Technical Data Sheet

📄Safety Data Sheet